popis
Aluminum discs are widely used in electronics, denné chemikálie, liek, kultúra, vzdelávanie a autodiely. Electrical appliances, izolácia, strojárskej výroby, automobiloch, letecký, military industry, molds, výstavba, printing and other industries. Kitchenware supplies such as non-stick pans, pressure cookers, atď. and hardware supplies such as lampshades, water heater shells, stretched tanks, atď. are among the most widely used deep-processed products of aluminum alloy plates and strips.
The material producing Aluminum discs need to have good tensile properties, oxidation resistance, mechanical strength, thermal conductivity and good processing properties. V súčasnosti, in terms of material selection of aluminum discs, aluminum alloy has become the mainstream choice. It is superior in mechanical properties and stamping processing and is widely used. Commonly used aluminum alloys include 1050, 1060, 6061, 7075, atď. Navyše, there are additives such as Mg, a, zn, atď. to improve the strength and corrosion resistance of aluminum alloys.
The rolling method is one of the main methods for producing aluminum discs. The principle of sheeting is to process the aluminum alloy billet in a hot state through multiple processes such as heating, valcovanie, and stretching.
China aluminum disc supplier
The stretching method is to stretch aluminum alloy blanks through a series of mechanical devices to produce aluminum discs. This method has a short process flow and high production efficiency, and is suitable for producing wafers of various specifications.
The casting method uses molten aluminum as raw material and produces aluminum discs through centrifugal pouring or die casting.
Aluminum disc or hliníkový kruh, also called aluminum wafers have a variety of surface treatment methods to improve their brightness, odolnosť proti korózii, odolnosť proti opotrebovaniu, atď. Currently, oxidation, spraying, atď. are commonly used.
Veľkosť hliníkového plechu
zliatina:1050, 1060, 1070, 1100, 3002, 3003, 3004, 5052, 5754, 6061 atď.
zlosť: O, H12, H14, H16, H18
hrúbka:0.012″ – 0,39″ (0.3mm – 10 mm)
Priemer:0.79″ – 47,3″ (20mm - 1200 mm)
povrch: Leštené, Svetlý, Eloxované
Materská cievka: CC alebo DC
závažia: Približne 2 mt na paletu pre všeobecnú veľkosť
MOQ: 5tona na veľkosť
Ochrana: papierová medzivrstva, biely film, modrý film, čiernobiely film, mikro viazaný film, podľa Vašej požiadavky.
povrch: čisté a hladké, žiadna svetlá škvrna, korózia, oleja, Perforovaný hliníkový plech, atď.
Štandardný produkt: GBT3880, 4000 JIS, EN485, ASTM-B209
Dodacia lehota: asi 30 dní po prijatí zálohy
Aluminum Discs Normally belongs to 1000 series aluminum circle. Hliníkový kruh je jedným z produktov hĺbkového spracovania hliníkového plechu. Hliníkové diskové disky majú jediný výrobný proces a vysoký výkon. Bežne sa používa v sérii hliníkových dosiek a pások. 1060 Aluminum alloy has good elongation, tensile strength, odolnosť proti korózii, good heat dissipation effect and good formability. It can meet the requirements of conventional processing.
hliník Circle is mainly used for general commercial and industrial uses, like the capacitor case, toothpaste case, medical tubes, kitchen ware, spray bottle, cosmetic case and glue tube case, dopravná značka, kuchynský riad, hrniec, pan, decorating and so on. With high quality casting and rolling coils or hot-rolled coils as raw materials, it goes through different cold rolling deformation. slitting, annealing and finally stamping into an aluminum disc, then packaging for delivery
-
-
-